Supplier: VWR Collection

Choose the suitable fitting for your tubing size.

Supplier: HICHROM

MicroTight® one-piece finger tight PEEK™ fittings are used to connect capillary tubing to MicroTight® unions, adapters or filters.

Supplier: Avantor

PEEK ¹/₃₂" microbore HPLC column inlet / outlet connectors. These column connectors are recommended for ¹/₃₂" microbore HPLC column connections. They are compatible with both capillary (360 µm OD) and ¹/₃₂" connection tubing.

Supplier: BOHLENDER

Distributor for connection of capillary tubing. With PFA Fittings for capillaries with Ext.Ø 3,2 mm (thread UNF ¹/₄").

Supplier: AGILENT HEWLETT PACKARD

Stainless steel capillaries are made of flexible stainless steel (0,6 mm OD) with ¹/₁₆" OD tubing at both ends to accept standard fittings.

Supplier: BOHLENDER

Straight fitting made of PTFE, capillary connection on both sides (UNF ¹/₄" thread), with 2 PFA fittings each for tubing Ext.Ø 1,6/2,2/3,2 mm.

Supplier: BOHLENDER

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Supplier: HAMILTON BONADUZ

The compression fittings and adaptors are designed to connect Hamilton removable needle (RN) and knurled hub (KH) syringes to glass capillary tubing and PEEK tubing. The connectors can be combined in a variety of different configurations to meet most connection needs.

Supplier: BOHLENDER

Two-part tubing coupling made of PP with PFA Fitting to connect capillaries with Ext.Ø. 3,2 mm. The passage with the integrated quick lock is tightly closed through loosening the coupling. Tubing connections are easily interrupted without dripping from the tube, tubes and removal flasks are tightly closed during exchange. Version and scope of delivery as per below chart.

Supplier: BOHLENDER

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: BOHLENDER

b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.

Supplier: BOHLENDER

Made of PFA to fix tubing in the capillary connectors (thread UNF ¹/₄") 28G) of b.safe Caps and b.safe Waste Caps. The conical seal cone clamps the tubing and seals the connection safely.

Supplier: BOHLENDER

HPLC sets for solvent supply containing b.safe caps GL 45 for four bottles, PFA-fittings for capillaries with Ext.Ø. 3,2 mm, blind fittings made of PFA to close unused connections as well as air valves with service life indicator.

Supplier: BOHLENDER

For the connection of elastic tubing (e.g. Viton, Tygon, silicone) on b.safe waste caps.

Supplier: BOHLENDER

Inner shape fits the outer shape of b.safe fittings for capillary tubing.

Supplier: GILSON

Designed to fit the Gilson MICROMAN® positive displacement pipette, Capillary Piston Tips are ideal for difficult-to-pipette samples including; viscous, volatile, dense, hot or cold, or hazardous liquids. The tips work like a syringe providing protection against pipette, sample, and user contamination, and produce accurate, reproducible, and precise results. Made of pure polypropylene, their slim fit allows you to use even the narrowest and deepest test tubes.

Supplier: BOHLENDER

To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.

Supplier: Avantor

Avantor® ACE® capillary/nano column couplers are suitable for connecting capillary and nano LC columns to stand-alone capillary/nano guard cartridges or for making similar LC connections.

Supplier: HICHROM

316 Stainless steel, precision bore ¹/₁₆" type tubing.

Supplier: HICHROM

Tubings are made of 316 stainless steel.

Supplier: HICHROM

Tubings are made of 316 stainless steel.

Supplier: Trajan Scientific and Medical

Chromatography tubing, PEEK, PEEKsil™ capillary tubing for HPLC, LC/MS applications, Ø int.: 0,2 mm, Ext.Ø: 1,59 mm, Colour: Blue, Length: 500 mm

Supplier: HICHROM

316 Stainless steel, precision bore ¹/₁₆" type tubing.

Supplier: VWR BRAND PRIVATE LABEL USA

Fire-polished, glass tubes.

Supplier: VWR Collection

Urine straws, 90 mm long, VWR®

Supplier: VITREX MEDICAL

For single use.

Supplier: HICHROM

PEEK. Can be used at temperatures up to 150 °C. Unlike stainless steel fittings, PEEK fingertight fittings will not permanently lock into place on the tubing. Compatible with all types of end fittings.

Supplier: MASTERFLEX PROPRIETARY

Get leak-free connection to barbed fittings.

Supplier: MASTERFLEX PROPRIETARY

No need to buy two fitting halves.

Supplier: MASTERFLEX PROPRIETARY

No more kinked tubing - allows tubing to rotate freely.